Cerdomus Imperial Stone White 12x24 Matte

Description

Cerdomus Imperial Stone White 12×24 Matte — Premium Porcelain Stone Look Tile from Italy

Cerdomus Imperial Stone White 12×24 Matte is a rectified, through-bodied porcelain stone look tile made in Italy by Cerdomus, reproducing the quiet authority of limestone quarried in the Italian Mediterranean tradition. The White colorway reads as a bright, luminous white with delicate tracing, held to a V1 uniform shade so large runs lay out with calm, predictable continuity. At 12″x24″ with an 8.5 mm body and a matte natural surface, it gives contractors, designers and architects a durable, low-sheen stone floor and wall option that works as comfortably in a residential bath as it does across a light-commercial lobby.

About the Imperial Stone Collection

Cerdomus has been producing porcelain in Castel Bolognese since 1969, and the Imperial Stone collection is drawn from the limestone of Italy’s Mediterranean architecture — the pale, weathered stone of palazzi and civic monuments. The range spans six tones from bright white through deep charcoal. Cerdomus builds the surface with its SurfacePro process, layering digital whites and ceramic inks so the graphic gains real optical depth, then working the veining so it registers under the hand as well as the eye. The result is a matte face with genuine texture rather than a flat printed sheet — and because every tile is rectified, joints can be tightened for a near-continuous stone field.

Installation & Applications for Cerdomus Imperial Stone White 12×24 Matte

Cerdomus Imperial Stone White 12×24 Matte ships 6 pieces per carton covering 11.75 sq ft. The tile is rectified, so a 2 mm minimum joint is workable over a properly prepared, flat substrate; Cerdomus recommends a self-levelling screed for rectified material. With an R10 slip rating (DIN EN 16165 Annex B) and a DCOF of 0.42 wet and dry under ANSI A326.3, this matte finish suits interior floors and walls — bathrooms, kitchens, entryways, living areas, feature walls and light-commercial spaces. For continuously wet or barefoot exterior areas such as pool surrounds and shower floors, specify the same colorway in the Cerdomus Safe finish, which raises slip resistance to R11 / A+B+C. The body is frost-proof under UNI EN ISO 10545-12, so Cerdomus Imperial Stone White 12×24 Matte carries outdoors as well — patios, terraces, porches, covered walkways and other exterior floors in freeze-thaw climates.

Technical Specifications

• Material: Porcelain stoneware, fully vitrified, rectified
• Finish: Matte (Natural)
• Nominal Size: 12″x24″ (30×60 cm)
• Thickness: 8.5 mm
• Pieces / Coverage per Carton: 6 pieces — 11.75 sq ft
• Water Absorption (UNI EN ISO 10545-3): ≤ 0.5% (Group BIa)
• Breaking Strength (UNI EN ISO 10545-4): > 1300 N
• Modulus of Rupture (UNI EN ISO 10545-4): > 35 N/mm²
• Deep Abrasion Resistance (UNI EN ISO 10545-6): ≤ 175 mm³
• Linear Thermal Expansion (UNI EN ISO 10545-8): 5.6 × 10⁻⁶ °C⁻¹
• Thermal Shock Resistance (UNI EN ISO 10545-9): Resistant
• Moisture Expansion (UNI EN ISO 10545-10): 0%
• Frost Resistance (UNI EN ISO 10545-12): Resistant — frost-proof
• Chemical Resistance (UNI EN ISO 10545-13): Class A (LA–HA)
• Stain Resistance (UNI EN ISO 10545-14): Class 5
• Slip Resistance: R10 (DIN EN 16165:2021 Annex B); barefoot A+B (Annex A)
• Dynamic Coefficient of Friction (ANSI A326.3): 0.42 dry / 0.42 wet
• Shade Variation: V1 (Uniform)
• Light Reflectance Value (LRV): Not published by Cerdomus
• Standard: UNI EN 14411 / ISO 13006 Annex G, Group BIa
• Manufacturer Article Code: 103113
• Country of Origin: Italy (Made in Italy)

Manufacturer reference: View the Imperial Stone collection on Cerdomus.